Progress equipment  There are 67 products.

per page
Showing 1 - 12 of 67 items
  • Fit to ropes from 8 to 12 mm. Usage: Speleology. Flanges and sheaves in hardened dural, inox screws. The safety catch allows to insert the rope without unhooking the carabiner from the belt. You can easily open it even if you wear gloves. Individually tested up to 5 kN. Res: 22 kN. Weight: 232 grams Fit to ropes from 8 to 12 mm. Usage: Speleology. Flanges and...

    43,50 €
  • Designed for self-safety or, when used in combination with a pulley with fixed side plates, for hauling system. When occurring, it can be used to replace both hand and chest ascenders. Unclipping system as for Amelia and Cirano. Works with O 8 - 13 mm ropes. Strength: 6kN. CE-EN 567 Designed for self-safety or, when used in combination with a...

    35,40 €
  • Very efficient loss-resistant progress capture pulley. The PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. The side plate locks when loaded and prevents opening of the pulley... Very efficient loss-resistant progress capture pulley. The PRO...

    92,30 €
  • Pulley on self-lubed brass with aluminium sheave. Fit for making a tackle. Fit to ropes up to 13 mm. Res. 23 kN. Weight 95 grams Pulley on self-lubed brass with aluminium sheave. Fit for making a...

    18,40 €
  • A revolutionary belay-descender device with assisted braking that delivers unparalleled safety and control. Gradual camming action reduces the impact force of a fall and decreases wear and tear on the rope. Proprietary Anti-Panic system automatically blocks the rope if the user loses control of the descent A revolutionary belay-descender device with assisted braking that...

    96,60 €
  • It allows to build a lanyard that can stand falls higher than “2” factor, so it can be used to realize a “via ferrata” kit. Depending on the number of holes in wich you insert the rope, you can properly use ropes from 9 to 11 mm. Weight: 60 grams It allows to build a lanyard that can stand falls higher than “2”...

    8,20 €
  • Upper or lower capstan replacement for Spider descender Upper or lower capstan replacement for Spider descender

    10,00 €
  • It works with ropes up to 12mm. Tempered duralumin cheeks and capstans. Stainless steel screws. Spring clip allows the rope to be inserted without removing the device from the harness It works with ropes up to 12mm. Tempered duralumin cheeks and...

    37,50 €
  • Clamp/grab device for single ropes. Semi-dynamic blocking system in case of fall. It works with frost or muddy ropes too. Fit to ropes from 12 to 19 mm. Weight: 335 grams. CE-EN 567 Clamp/grab device for single ropes. Semi-dynamic blocking system in...

    65,00 €
  • A super-compact, lightweight and easy-handling pulley with fixed side plates. The Sphinx Pro is designed for intensive use at higher speeds, but is small and light enough to easily carry on your harness or throw in your pack for ski touring and mountaineering A super-compact, lightweight and easy-handling pulley with fixed...

    25,60 €
  • Blocking ultra light pulley for ropes from 8 to 13 mm. It also works on sling from 10 to 16 mm width. Thanks to its small dimension and to the combination of blocking system and pulley, this device can be used in many situations: mountaineering, rescue, working with ropes Blocking ultra light pulley for ropes from 8 to 13 mm. It also...

    60,50 €
  • Multipurpose hot-forged aluminum plate, for use with single, double and twin ropes. Its main applications are self-locking belaying for one or two seconds and abseiling Multipurpose hot-forged aluminum plate, for use with single, double...

    8,90 €
Showing 1 - 12 of 67 items