Rope Descenders  There are 11 products.

Showing 1 - 11 of 11 items
  • Fit to ropes from 8 to 12 mm. Usage: Speleology. Flanges and sheaves in hardened dural, inox screws. The safety catch allows to insert the rope without unhooking the carabiner from the belt. You can easily open it even if you wear gloves. Individually tested up to 5 kN. Res: 22 kN. Weight: 232 grams Fit to ropes from 8 to 12 mm. Usage: Speleology. Flanges and...

    42,60 €
  • It works with ropes up to 12mm. Tempered duralumin cheeks and capstans. Stainless steel screws. Spring clip allows the rope to be inserted without removing the device from the harness It works with ropes up to 12mm. Tempered duralumin cheeks and...

    37,50 €
  • Fit to ropes from 9 to 12 mm. Self-locking system operates if you leave the handle. There is no “no panic” system. Inox lower sheave. In order to have a right descent, you must strongly grip the handle but you should avoid using it as a brake or you will damage the rope. Individually tested up to 5 kN. Res: 22 kN. Weight: 315 grams. CE-EN341 A class Fit to ropes from 9 to 12 mm. Self-locking system operates if you...

    84,80 €
  • Studied for deep verticals. Individually tested up to 485 Kg. Res: 18 kN. Weight: 485 grams. You can add or remove bars while descending, so that you can adapt your speed to the weight of the rope below you. Usage: Speleology Studied for deep verticals. Individually tested up to 485 Kg. Res:...

    63,00 €
  • It works with one or two ropes. It allows to graduate braking when a load is applied. You cannot loose it. It does not wear down the connector to wich it is applied and it does not twist the ropes.It works as self-locking system in emergency climbs with one or two ropes up to 12 mm diameter It works with one or two ropes. It allows to graduate braking when...

    25,80 €
  • Descender 8-ring for canyoning. Thanks to the two necks obtained on the body of the device, you can decide the kind of assembling and therefore the level of braking. The descender is also kept always in correct position thanks to a rubber piece in the hole. Weight: 90 grams. Designed for single ropes form 9 to 13 mm and for double ropes from 8 to 10 mm.... Descender 8-ring for canyoning. Thanks to the two necks obtained on...

    25,60 €
  • Single and double ropes descending device for ropes up to 12 mm. Tempered duralumin cheeks and wheels. Stainless steel screws and upper pivots. Spring clip allows the rope to be inserted without removing the device from the harness Single and double ropes descending device for ropes up to 12 mm....

    41,80 €
  • Classic 8-ring descender for ropes from 9 to 11 mm. Resistance: 25 kN. Weight: 100 grams Classic 8-ring descender for ropes from 9 to 11 mm. Resistance: 25...

    8,90 €
  • New descender especially conceived for canyoning, designed not only for progression on rope but also for the use in emergency, recovery and rescue situations, very difficult to manage with other devices. The use is quick, safe and effective in every condition New descender especially conceived for canyoning, designed not only...

    17,90 €
  • Classic 8-ring descender for ropes from 9 to 11 mm. Resistance: 35 kN. Weight: 126 grams Classic 8-ring descender for ropes from 9 to 11 mm. Resistance: 35...

    9,30 €
  • New descender especially conceived for canyoning, designed not only for progression on rope but also for the use in emergency, recovery and rescue situations, very difficult to manage with other devices. The use is quick, safe and effective in every condition. Supplied with Large Multiuse Auto Block - For rope from 7,8 to 12,7 diameter Supplied with... New descender especially conceived for canyoning, designed not only...

    26,00 €
Showing 1 - 11 of 11 items